Roland AT900 Music Atelier Page 147 Owner'S Manual Download

Page: 147 / 300

145

Applying Various Effects to the Sound

For the part to which you wish to apply the chorus effect,
touch the Chorus “ON/OFF” display to change the setting.

Each time you touch the Chorus setting, it will alternate ON/OFF.

fig.05-15.eps

Touch <Exit>.

Indication

Description

The Chorus effect will be applied to the voice.

OFF

The Chorus effect will not be applied to the voice.

NOTE

Some voices do not allow the
Chorus effect to be applied. For
details refer to “Voice List”
((Appendix: separate booklet).

You can open the Pedal
Keyboard screen, Lower
Keyboard screen or Upper
Keyboard screen with touching
<Pedal>, <Lower>, and
<Upper>.

AT-900_e.book 145 ページ２００７年９月７日　金曜日　午前８時４３分

Summary of Contents for AT900 Music Atelier













































































































































































































































































































Search results

Summary of Contents for AT900 Music Atelier

Reviews:

Related manuals for AT900 Music Atelier

Brands by name

Popular brands

Roland AT900 Music Atelier, Owner'S Manual

Search results

Summary of Contents for AT900 Music Atelier

Reviews:

Related manuals for AT900 Music Atelier

Brands by name

Popular brands