Roland AT900 Music Atelier Page 145 Owner'S Manual Download

Page: 145 / 300

143

Applying Various Effects to the Sound

This setting allows you to choose the brightness of the Rotary
sound obtained when using the Rotary effect (p. 141).

Touch <Sound/KBD> on the Main screen.

fig.05-08.eps

The Sound/Keyboard screen appears.

fig.VoiceList.eps

Touch <Effect>.

The Effect screen appears.

fig.05-17.eps

Touch <

> to display the Rotary Color.

Touch the value setting buttons for Rotary
Color to adjust the setting.

Each time you touch the Rotary Color setting, it will
switch between “BRIGHT” and “MELLOW.”

Touch <Exit>.

These settings remain stored in memory even while the
power is off.

Changing the Brightness of the Rotary
Effect (Rotary Color)

Setting

BRIGHT, MELLOW

AT-900_e.book 143 ページ２００７年９月７日　金曜日　午前８時４３分

Summary of Contents for AT900 Music Atelier













































































































































































































































































































Search results

Summary of Contents for AT900 Music Atelier

Reviews:

Related manuals for AT900 Music Atelier

Brands by name

Popular brands

Roland AT900 Music Atelier, Owner'S Manual

Search results

Summary of Contents for AT900 Music Atelier

Reviews:

Related manuals for AT900 Music Atelier

Brands by name

Popular brands