Roland AT900 Music Atelier Owner'S Manual Download

Page: 42 / 300

Convenient Functions

Touch <

> to switch screens, and touch a

keyword appropriate for the character of the song.

fig.00-19.eps

The Registration buttons [1]–[4] flash.

Panel settings appropriate for the keyword will automatically be called up for
the Registration [1]–[4] buttons.

On the Lower keyboard, play a chord.

At the moment you play the keyboard, the Intro will begin, and then the
Rhythm and Automatic Accompaniment will play.

Press a Registration button from [1] through [4] to switch
the panel settings.

Press the [Ending] or [Start/Stop] button to stop the
Rhythm.

To end the Music Assistant function, press the [One Touch
Program] button, extinguishing its indicator.

AT-900_e.book 40 ページ２００７年９月７日　金曜日　午前８時４３分

Summary of Contents for AT900 Music Atelier













































































































































































































































































































Search results

Summary of Contents for AT900 Music Atelier

Reviews:

Related manuals for AT900 Music Atelier

Brands by name

Popular brands

Roland AT900 Music Atelier, Owner'S Manual

Search results

Summary of Contents for AT900 Music Atelier

Reviews:

Related manuals for AT900 Music Atelier

Brands by name

Popular brands