manualshive.com logo in svg

Roland AT900 Music Atelier, Owner'S Manual

The Roland AT900 Music Atelier is a top-of-the-line keyboard equipped with advanced features to enhance your musical creativity. For easy access to its user manual, you can download it for free from manualshive.com. Discover the full potential of this remarkable instrument with this comprehensive manual.

Share
Download
background image

 

276

 

Error Message

 

Error Message

Meanings

Copy Protected.
Can’t Save.

 

To protect the copyright, this music file cannot be saved as SMF format.

 

Write-Protected 
Media.

 

The protect tab of the storage media is set to the Protect (write prohibit) position. 
Move the tab to the Write (write permit) position and try the operation again.

 

Can’t Save
This Song.

 

You can only play the music data. It cannot be saved on a storage media

 

Master Disk

 

This storage media does not allow initialization or saving. Insert a different storage media and try the 
operation again.

 

Read Only File.

 

You cannot overwrite-save or delete a file on this storage media.

 

No Media

 

Storage media is not connected. Please connect storage media.

 

Media Full

 

Saving is not possible because the storage media does not have enough space. Please use other storage 
media that has been formatted by the ATELIER.

 

Unknown Media

 

This storage media cannot be used. Please format it.

 

Media Ejected

 

The storage media was disconnected while it was being accessed. Please try the operation again.

 

Damaged Media

 

A damaged area was found on the storage media.

 

Can’t Read

 

This data cannot be read.

 

Can’t Play

 

Playback was halted because the song could not be read fast enough.
The song could not be read from the storage media fast enough for playback. Press the [Reset] button, then 
press the [Play/Stop] button once again.

 

No Rhythm

 

There is no rhythm in user memory.

The rhythm used by the selected registration was deleted from user memory, or its order was changed.

 

Designated 
positions are 
incorrect.

 

When calibrating the touch panel, the appropriate point was not touched correctly.
If you touch a location other than the specified point, the discrepancy may become severe.
Please be sure to touch the correct point.

 

Memory Full

 

The song data is excessively large, and cannot be loaded.

The performance data is excessively large, and cannot be loaded.

 

MIDI Buffer Full

 

The ATELIER cannot deal with the excessive MIDI data sent from the external MIDI device. Reduce the 
amount of MIDI data sent to the ATELIER.

 

Communication
Error

 

A MIDI cable or computer cable has been disconnected. Connect it properly and securely.

Data transfer failed. Please transfer the data again.

The ATELIER is unable to handle the data that was sent. Please send data that the ATELIER is able to handle.

 

Memory Full

 

Recording or editing is not possible because the memory of the ATELIER is full.

 

Memory Error

 

An error occurred in internal memory. Please perform the operation again. If this indication appears even 
after you’ve repeated the operation several times, please contact Roland service.

 

Not found

 

A rhythm or registration that meets the conditions was not found.

 

This is registration 
data of a type that 
is not supported.

 

This instrument cannot use this registration.

 

USB over current

 

USB memory not supported by the ATELIER was connected. This USB memory cannot be used with the 
ATELIER.

AT-900_e.book 276 ページ ２００７年９月７日　金曜日　午前８時４３分

Summary of Contents for AT900 Music Atelier













































































































































































































































































































Reviews:

No comments

Related manuals for AT900 Music Atelier

Yamaha 503 Reference Manual preview
503
Brand: Yamaha Pages: 104
TE-Group mr Handsfree Blue iCover Mini User Manual preview
mr Handsfree Blue iCover Mini
Brand: TE-Group Pages: 6
Microsoft T9T-00001 Quick Start Manual preview
T9T-00001
Brand: Microsoft Pages: 7
Tellur TLL491051 User Manual preview
TLL491051
Brand: Tellur Pages: 4
SAI square Magic Tok Manual preview
Magic Tok
Brand: SAI square Pages: 17
Korg i2 HD Installation Manual preview
i2 HD
Brand: Korg Pages: 11
A4Tech GK-300 User Manual preview
GK-300
Brand: A4Tech Pages: 4
Nokia SU-42 User Manual preview
SU-42
Brand: Nokia Pages: 8
Nokia Power Keyboard SU-42 User Manual preview
Power Keyboard SU-42
Brand: Nokia Pages: 8
CIGGO Tattoo Plus 75 User Manual preview
Tattoo Plus 75
Brand: CIGGO Pages: 16
Akko 5075 User Manual preview
5075
Brand: Akko Pages: 16
Cortek Gammec XForce Quick Manual preview
Gammec XForce
Brand: Cortek Pages: 2
Cortek Gammec XCommand Quick Manual preview
Gammec XCommand
Brand: Cortek Pages: 2
Naxa NSW-10 LifeForce+ Instruction Manual preview
NSW-10 LifeForce+
Brand: Naxa Pages: 22
Franklin BOOKMAN DMQ-440 User Manual preview
BOOKMAN DMQ-440
Brand: Franklin Pages: 22
Fellowes Slimline Cordless Combo Quick Start preview
Slimline Cordless Combo
Brand: Fellowes Pages: 3
Trust 16087 User Manual preview
16087
Brand: Trust Pages: 2
Advanced Racing Computers vLink User Manual preview
vLink
Brand: Advanced Racing Computers Pages: 2

Brands by name

Popular brands

Load more brands