Roland AT900 Music Atelier Page 205 Owner'S Manual Download

Page: 205 / 300

203

Creating Original Accompaniment Rhythms

11.

Touch <

> to change the setting.

12.

Touch <Exit>.

The Division Options screen reappears.

Edit the internal rhythm.

Copying the Rhythm in a Selected

Measure

Bring up the Rhythm Customize screen (p. 199).

Touch <Copy> (to copy the selected measure).

fig.RC-10.eps

The following screen appears.

fig.RC-13.eps

To cancel operation, touch <Cancel>.

Touch <OK>.

Copies the rhythm in the displayed measure and adds it
to the end of that measure.

Deleting the Rhythm in a Selected

Measure

Bring up the Rhythm Customize screen (p.
199).

Touch <Del> (to copy the selected measure).

fig.RC-10.eps

The following screen appears.

fig.RC-14.eps

To cancel operation, touch <Cancel>.

Touch <OK>.

The selected measure is deleted.

Creating the User Rhythm

Editing the Rhythm

What you can do

Page

Copying the Rhythm in a Selected Measure

p. 203

Deleting the Rhythm in a Selected Measure

Erasing Sounds

Adding Sounds

Altering Voices

Changing the Velocity

p. 205

Moving Sounds

p. 205

AT-900_e.book 203 ページ２００７年９月７日　金曜日　午前８時４３分

Summary of Contents for AT900 Music Atelier













































































































































































































































































































Search results

Summary of Contents for AT900 Music Atelier

Reviews:

Related manuals for AT900 Music Atelier

Brands by name

Popular brands

Roland AT900 Music Atelier, Owner'S Manual

Search results

Summary of Contents for AT900 Music Atelier

Reviews:

Related manuals for AT900 Music Atelier

Brands by name

Popular brands