Roland AT900 Music Atelier Owner'S Manual Download

Page: 106 / 300

104

Using Rhythm Performance

You can delete rhythms stored in User memory (p. 82) or USB memory.

Touch <Rhythm> on the Main screen.

The Rhythm screen appears.

Touch <

> (Utility) on the Rhythm screen.

The Utility screen appears.

fig.02-10.eps

Touch <File Edit>.

The Rhythm File Edit screen appears.

fig.02-32.eps

Deleting Saved Rhythm

Button

Meaning

Description

Rename

Modify the name

The Rename screen appears. You can touch the
screen and rename the selected rhythm (p. 102).

Change the order
(upward)

The selected rhythm will be moved earlier in the
order (p. 100).

Down

Change the order
(downward)

The selected rhythm will be moved later in the
order (p. 100).

Delete

Delete the Rhythm

The selected rhythm will be deleted.

Copy

Copies the rhythm

You can copy rhythms from USB memory to user
memory, or copy rhythms from user memory to
USB memory (p. 97).

AT-900_e.book 104 ページ２００７年９月７日　金曜日　午前８時４３分

Summary of Contents for AT900 Music Atelier













































































































































































































































































































Search results

Summary of Contents for AT900 Music Atelier

Reviews:

Related manuals for AT900 Music Atelier

Brands by name

Popular brands

Roland AT900 Music Atelier, Owner'S Manual

Search results

Summary of Contents for AT900 Music Atelier

Reviews:

Related manuals for AT900 Music Atelier

Brands by name

Popular brands