Roland AT900 Music Atelier Owner'S Manual Download

Page: 189 / 300

187

Recording/Playing Back What You Play

This setting (ON/OFF) determines whether or not a
metronome count-in (2 measures) will be heard after pressing
the [Play/Stop] button on recording.

Touch <Rec/Play> on the Main screen.

The Rec/Play screen appears.

fig.07-04.eps

Touch <

> (Utility).

The Utility screen appears.

fig.07-22.eps

Touch <Options>.

fig.03-37.eps

Touch <

> to display the Count-In

Rec.

Touch the Count-In Rec setting (ON/OFF) to
switch it between “ON/OFF.”

Each time you touch the Count-In Rec setting, it will
alternate between ON/OFF.

Touch <Exit>.

Starting recording at the right
moment (Count-In Recording)

Setting

Description

A two-measure count will sound before
recording

OFF

No count will sound before recording

AT-900_e.book 187 ページ２００７年９月７日　金曜日　午前８時４３分

Summary of Contents for AT900 Music Atelier













































































































































































































































































































Search results

Summary of Contents for AT900 Music Atelier

Reviews:

Related manuals for AT900 Music Atelier

Brands by name

Popular brands

Roland AT900 Music Atelier, Owner'S Manual

Search results

Summary of Contents for AT900 Music Atelier

Reviews:

Related manuals for AT900 Music Atelier

Brands by name

Popular brands