Roland AT900 Music Atelier, Owner'S Manual

Page: 202 / 300

200
Creating Original Accompaniment Rhythms
What is the Division?
A song progresses in predictable a sequence, such as intro,
melody A, melody B, bridge and ending.
With the ATELIER, such changes in songs are allocated to the
following six performance states. We call these six parts of a
song “Divisions.”
You can make a song more lively or more restrained by
increasing or reducing played parts by Divisions. You can
also modify a song by changing the voice of the parts in the
Divisions.
1.
Bring up the Rhythm Customize screen (p.
199).
fig.RC-01.eps
2.
Touch < > (Utility).
The Utility screen appears.
fig.RC-02.eps
3.
Touch <Div Select> (Division Select).
fig.RC-03.eps
You can open the Division Select screen by touching the
Division name indication (p. 199) in the Rhythm Customize
screen.
4.
Touch a Division name to select the Division.
fig.RC-04.eps
This returns you to the Rhythm Customize screen. The
name of the selected division now appears in the Rhythm
Customize screen.
You can touch < > to hear how the rhythm
sounds.
Selecting the Division
Division Performance division
Intro The intro is played at the start of a song.
Original This is a basic accompaniment pattern.
Fill In To
Variation
This is a phrase inserted at a juncture where
the mood changes. It is used to make a song
more lively.
After the phrase is played, the variation’s
accompaniment pattern is played.
Variation
This is a developmental accompaniment
pattern. It is a variation on an Original.
Fill In To
Original
This is a phrase inserted at a juncture where
the mood changes. It is used to make a song
more sedate.
After the phrase is played, the original’s
accompaniment pattern is played.
Ending This is played at the end of a song.
AT-900_e.book 200 ページ ２００７年９月７日 金曜日 午前８時４３分