Rohde & Schwarz SCV8000E/R System Manual Download Page 181

Page: 181 / 214

Chapter 8

Service

2104.6536.72

- 8.7 -

E-1

Backing Up and Restoring the Configuration
Settings

Prior to replacing the R&S SX801 exciter, all of the configuration settings can be saved on
the PC.

If the

All

option is used, all of the settings for the currently selected operating mode will be

saved. These settings can be restored once the exciter has been exchanged.

Fig. 3 Calling the "Storage" function

Fig. 4 Backing up all of the configuration settings: "All" option

Note

For more detailed information about the Storage function, please see the "Maintenance"
chapter, section "Backing Up Parameter Data" in the exciter manual.

Summary of Contents for SCV8000E/R























































































































































































































Search results

Summary of Contents for SCV8000E/R

Reviews:

Related manuals for SCV8000E/R

Brands by name

Popular brands

Rohde & Schwarz SCV8000E/R, System Manual

Search results

Summary of Contents for SCV8000E/R

Reviews:

Related manuals for SCV8000E/R

Brands by name

Popular brands