Rohde & Schwarz SCV8000E/R, System Manual

Page: 146 / 214

Chapter 5 Operating
2104.6536.72 - 5.64 - E-1

Parameters > Rescan
Refresh to show all parameters that can be displayed in the GUI

Cal > Calibration
Access to the alignment parameters – for production staff only

Help > Help
Access to help information

About > About this
Information about the software version
Selection column
The selection column contains the following tabs:

Linear
Opens the operating window for the linear corrector.

Nonlinear
Opens the operating window for the nonlinear corrector.

FreqCorrection
Opens the operating window for nonlinear frequency response correction.
Work area
The work area contains the fields required by the different operating windows. Use the fields
to perform precorrection.
5.2 Operating Functions
5.2.1 Operating Fields
The precorrection settings can be entered using three operating fields. Besides the charac-
teristic field, the operating fields contain different operating elements such as buttons, input
fields and checkboxes.
Depending on your system configuration, the following operating fields will be present:

Linear Precorrection

Nonlinear Precorrection

Nonlinear frequency response precorrection
The following figure provides a basic view of how an operating field is structured: