Rohde & Schwarz SCV8000E/R, System Manual

Page: 83 / 214

Chapter 5 Operating
2104.6536.72 - 5.1 - E-1
1 Introduction to Operation
The R&S SCV8000 compact transmitter can be operated as follows:
– Local operation using the display and menu keys on the front panel of the R&S SX801
– Operation via the web browser
– Monitoring and control via SNMP
In the case of operation via the web browser of a connected PC/client PC, there is the fol-
lowing distinction:
– Remote operation via a directly connected PC
– Remote control via a remote network client
1.1 Local and Remote Operation
Fig. 1 LOCAL key (with LED) for switching between local and remote operation
Local operation
For on-site configuration work, the R&S SX801 must be set to local . With the instrument in
local mode you can enter parameter settings by using the keys on the instrument or via a
PC connected to
X3 (Ethernet Local). When the instrument is in this operating mode, re-
mote access is restricted to the querying of values.
To switch to local operation, press the LOCAL key (the associated LED lights up).
Remote operation
For remote control, the R&S SX801 must be set to remote . With the instrument in remote
mode you can change settings via the X2 interface (Ethernet Remote). When the instru-
ment is in this operating mode it cannot be configured locally (via the keyboard or via X3) .
To deactivate local operation, press the LOCAL key again (the associated LED goes out).