Rohde & Schwarz SCV8000E/R, System Manual

Page: 149 / 214

Chapter 5 Operating
2104.6536.72 - 5.67 - E-1
Fig. 17 Contextual menu for the precorrector GUI
The contextual menu appears if you click on a vacant point of the drawing plane with the
right mouse button. You can use the contextual menu to call up the navigator window for
making fine settings.
Note
A precorrection curve is always modeled locally in the drawing plane (red curve) and then
written to the precorrection memory by the menu function Curve Data xxx Write.
Creating a new characteristic
To create a new characteristic, you must place the relevant points with the mouse into the
chart in order from left to right. First, a point is set at the minimum unit on the x axis. The
end is formed by a final point at the maximum unit on the x axis.
1. Click on the right mouse button to show the context menu and select the New Curve
menu item. When you are asked if you want to delete the curve already displayed, an-
swer with
OK .
2. Follow the prompting "Click to set curve points ..." and set the points one after the other
with the left mouse button.
The points are automatically joined to a curve.