Preface
R&S
®
ETL
7
Getting Started 2118.4130.02 ─ 04
1
Preface
This chapter provides information related to safety issues and the product documenta-
tion.
1.1
For Your Safety
The R&S
ETL is designated to develop, produce and verify electronic components and
devices in an industrial environment. An overview of its designated purpose is given in
on page 12; details are provided throughout the prod-
uct documentation. Observe the operating conditions and performance limits stated in
the data sheet (specifications).
The product documentation helps you to use the R&S
ETL safely and efficiently. Keep
the product documentation in a safe place and pass it on to the subsequent users.
Safety information is part of the product documentation. It warns you about the poten-
tial dangers and gives instructions how to prevent personal injury or damage caused
by dangerous situations. Safety information is provided as follows:
●
In the "Basic Safety Instructions", safety issues are grouped according to subjects.
For example, one subject is electrical safety. The "Basic Safety Instructions" are
delivered with the R&S
ETL in different languages.
●
Throughout the documentation, safety instructions are provided when you need to
take care during setup or operation.
Always read the safety instructions carefully. Make sure to comply fully with them. Do
not take risks and do not underestimate the potential danger of small details such as a
damaged power cable.
1.2
Information Provided on the Instrument
The context-sensitive help provides quick user assistance, see
The open source acknowledgment is stored in PDF format under:
C:\R_S\Instr\doc
On R&S
ETLs with SSD/HDD, the product documentation in PDF format is also stored
there. On these R&S
ETLs, you can display the PDFs using the Foxit Reader that is
already installed.
To update the PDFs
The PDFs provided on the R&S
ETL originate from the date of delivery. For up-to-date
downloads, visit the product site described at:
Information Provided on the Instrument
