Setting Up the Instrument
R&S
®
ETL
15
Getting Started 2118.4130.02 ─ 04
Risk of injury when stacking instruments
A stack of instruments can tilt over and cause injury if not stacked correctly. Further-
more, the instruments at the bottom of the stack can be damaged due to the load
imposed by the instruments on top.
Observe the following instructions when stacking instruments:
●
Place the bottom instrument on a stable, flat and level surface with the bottom of
the instrument facing down.
●
Stack the instruments according to their size and weight, with the largest and heav-
iest instrument at the bottom.
●
Never stack more than three instruments. If you need to stack more than three
instruments, install them in a rack.
To adjust the handle position
1. Pull at both side knobs and turn the handle as shown in
2. When the handle is in the desired position, loose your hold on both side knobs.
Figure 4-1: Moving the handle of the R&S
ETL
Putting Up the Instrument
