Getting Started
R&S
®
AREG100A
32
User Manual 1178.7417.02 ─ 04
Display key
Assigned functions
[Undo]
Reverts the last operation.
[User]
Adds a parameter to the user menu for quick access.
3.2.1.8
[USB] Connector
USB (universal serial bus) interfaces of type A (host USB).
●
Connection of peripherals such as mouse or keyboard
●
Connection of memory stick for file transmission
●
Firmware update
Further USB interface type A (host USB) and a USB interface type B ([USB In]) are
available on the rear panel.
3.2.1.9
Sensor
Connector for R&S NRP sensors.
The R&S
AREG100A supports the use of R&S NRP power sensors in various ways
including the use as a power viewer.
A power sensor is connected to the R&S
AREG100A by inserting the male connector.
To disconnect, pull the connector by its sleeve. You cannot disconnect the sensor sim-
ply by pulling at the cable or the rear part of the connector.
3.2.2
Rear Panel Tour
This section provides an overview of the connectors at the rear panel of the instrument.
For technical data of the connectors, refer to the data sheet.
Figure 3-4: Rear panel view of the R&S
AREG100A
1 = IEC 625/IEEE 488 connector
2 = USB In connector (type micro-B)
3 = LAN connector
4 = USB connector (type A)
5 = AC power supply connection and main power switch
Instrument Tour