Rohde & Schwarz AREG100A, User Manual, Page: 249 / 321

Remote Control Commands
R&S
®
AREG100A
249 User Manual 1178.7417.02 ─ 04
Parameters:
<AregOtaOffset> float
Air gap between DUT and AREG generator.
Range:
0.01 to 10
Increment: 0.01
*RST:
1
Default unit: m
Example: :SOURce:AREGenerator:RADar:OTA:OFFSet 0.8
Manual operation: See "Air Gap from DUT to AREG" on page 61
[:SOURce<hw>]:AREGenerator:RADar:POWer:INDicator?
The Radar Power Indicator is a summary indicator for all radar object powers.
Return values:
<PowIndicator> OFF | GOOD | WEAK | BAD
OFF
No or very weak RX power is detected.
GOOD
The RX power is in linear range.
WEAK
The RX power is strong, non-linear effects can occur.
BAD
The RX power is in a range, where the receiver is in saturation.
*RST:
OFF
Example:
:SOURce:AREGenerator:RADar:POWer:INDicator
Usage: Query only
[:SOURce<hw>]:AREGenerator:UNITs:RANGe <AregUnitRange>
Defines the range unit.
Parameters:
<AregUnitRange> M | CM | FT
M
Meter
CM
Centimeter
FT
Feet
*RST:
M
Example: :SOURce:AREGenerator:UNITs:RANGe FT
Manual operation: See "Range Unit" on page 59
SOURce Subsystem