Getting Started
R&S
®
AREG100A
17
User Manual 1178.7417.02 ─ 04
Note the EMC classification in the data sheet.
3.1.1.2
Unpacking and Checking the Instrument
Unpack the R&S
AREG100A carefully and check the contents of the package.
●
Check if all items listed on the delivery note, including this getting started manual,
are included in the delivery.
●
Check the R&S
AREG100A for any damage.
If the contents are damaged, immediately contact the carrier who delivered the
package.
Packing material
Retain the original packing material. If the instrument needs to be transported or ship-
ped later, you can use the material to protect the control elements and connectors.
3.1.1.3
Accessory List
The instrument comes with the following accessories:
●
Power cable
●
Getting Started printed manual
3.1.1.4
Placing or Mounting the Instrument
The R&S
AREG100A is designed for use under laboratory conditions, either on a
bench top or in a rack using the standard rackmount kit.
Bench top operation
If the R&S
AREG100A is operated on a bench top, the surface must be flat. The instru-
ment can be used in horizontal position, standing on its feet, or with the support feet on
the bottom extended.
Preparing for Use