Rohde & Schwarz AREG100A, User Manual, Page: 233 / 321

Remote Control Commands
R&S
®
AREG100A
233 User Manual 1178.7417.02 ─ 04
Example: SYST:IDEN AUTO
Automatically assigns the OPT and IDN strings according to the
selected instrument language.
Manual operation: See "Mode" on page 146
:SYSTem:IDENtification:PRESet
Sets the
*IDN
and
*OPT
strings in user defined mode to default values.
Example: SYST:IDEN USER
SYST:IDEN:PRES
Usage: Event
Manual operation: See "Set to Default" on page 146
:SYSTem:IRESponse <IdnResponse>
Defines the user defined identification string for
*IDN
.
Note : While working in an emulation mode, the instrument's specific command set is
disabled, i.e. the SCPI command
SYST:IRES
is discarded.
Parameters:
<IdnResponse> string
Example:
SYST:IDEN USER
// Selects a user-defined identification
SYST:IRES "Test Device"
// Defines identification string 'test device'
*IDN?
// Response: 'test device'
Manual operation: See "IDN String" on page 146
:SYSTem:ORESponse <OResponse>
Defines the user defined response string for
*OPT
.
Note : While working in an emulation mode, the instrument's specific command set is
disabled, i.e. the SCPI command
SYST:ORES
is discarded.
Parameters:
<OResponse> string
Example:
SYST:IDEN USER
// Selects a user-defined identification
SYST:ORES "Test Option"
// Defines the OPT string 'test option'
*OPT?
// Response: 'test option'
Manual operation: See "OPT String" on page 146
SYSTem Subsystem