Rohde & Schwarz AREG100A, User Manual, Page: 230 / 321

Remote Control Commands
R&S
®
AREG100A
230 User Manual 1178.7417.02 ─ 04
:SYSTem:COMMunicate:NETWork[:COMMon]:WORKgroup <Workgroup>
Sets an individual workgroup name for the instrument.
Parameters:
<Workgroup> string
Example: See Example "Retrieving information on network-related set-
tings" on page 218.
Manual operation: See "Workgroup" on page 141
:SYSTem:COMMunicate:NETWork[:IPADdress]:DNS <DNS>
Determines or queries the network DNS server to resolve the name.
Parameters:
<DNS> string
Example: See Example "Retrieving information on network-related set-
tings" on page 218.
Manual operation: See "DNS Server" on page 142
:SYSTem:COMMunicate:NETWork[:IPADdress]:GATeway <Gateway>
Sets the IP address of the default gateway.
Parameters:
<Gateway> string
Range:
0.0.0.0 to ff.ff.ff.ff
Example: See Example "Retrieving information on network-related set-
tings" on page 218.
Manual operation: See "Default Gateway" on page 142
:SYSTem:COMMunicate:NETWork[:IPADdress]:SUBNet:MASK <Mask>
Sets the subnet mask.
Parameters:
<Mask> string
Example: See Example "Retrieving information on network-related set-
tings" on page 218.
Manual operation: See "Subnet Mask" on page 142
:SYSTem:COMMunicate:SERial:BAUD <Baud>
Defines the baudrate for the serial remote control interface.
SYSTem Subsystem