33
Recording Your Performances
If a screen like the following appears
If the save destination already contains data, the following message will appear.
•
Press the [SET] piston if you want to overwrite the data; i.e., replace the previous contents of the song.
The existing data will be erased, and the performance data you recorded will be saved.
•
If you decide that you want to keep the performance data that’s currently in the save-destination, press the [Value/Exit Menu] knob.
The Save operation will be cancelled, and you’ll return to the previous screen. Select a different save-destination.
Deleting a Recorded Song
MEMO
You can’t erase a preset song.
1.
If you want to delete a song that’s saved on USB flash drive, connect your USB flash drive to the USB memory connector .
2.
From the main screen, press the [STOP] piston to access the “Song Recorder” screen .
3.
Turn the [Select/Menu] knob to select “Delete Song .”
4.
Press the [Select/Menu] knob to access the “Delete Song” screen .
5.
Turn the [Select/Menu] knob to select “Delete from”, and turn the [Value/Exit Menu] knob to select the appropriate media .
Setting
Explanation
INTERNAL
Delete a song from internal memory.
USB
Delete a song from USB flash drive. Shown only if USB flash drive is connected to the
USB memory connector.
6.
Turn the [Select/Menu] knob to select “No .”, and turn the [Value/Exit Menu] knob to specify the song that you want to delete .
7.
Press the [SET] piston; a confirmation screen will appear .
8.
Press the [SET] piston once again to delete the song .
If you decide to cancel, press the [Value/Exit Menu] knob.
NOTE
ѥ
ѥ
Do not disconnect the USB flash drive or turn off the power before the deletion has been completed. Otherwise, you risk damaging the USB flash drive or the
organ’s internal memory, rendering it unusable.
9.
Press the [Value/Exit Menu] knob three times to return to the main screen .
