35
Hymn Player
Selecting Hymn or Prelude
1.
Press the [HYMN PLAYER] piston .
2.
Turn the [Select/Menu] knob to move the cursor to Mode .
3.
Turn the [Value/Exit Menu] knob to select Hymn or Prelude .
MEMO
The pedalboard doesn’t respond when in the Hymn Player mode.
If a non-organist stepped on the pedals when operating the hymn
player, the pedals would not play a distracting sound.
Selecting Hymn number
1.
Press the [HYMN PLAYER] piston .
2.
Turn the [Select/Menu] knob to move the cursor to Hymn
number .
3.
Turn the [Value/Exit Menu] knob to select the Hymn number .
Or while holding the [HYMN PLAYER] or [STOP] piston, press the hymn
number with the general memory pistons.
Playing a Hymn
1.
Press the [PLAY] piston .
An introduction will play for the selected hymn.
2.
When the introduction has finished, press the [PLAY] piston
again and the verse will begin . At the conclusion of each
verse simply press the [PLAY] piston again to hear as many
additional verses as desired .
If NO introduction to the hymn is desired, turn the [Select/Menu] knob
to Next, and turn the [Value/Exit Menu] knob to select Verse.
Press the [PLAY] piston and the hymn will play the verse only.
Playing a Prelude
1.
Press the [HYMN PLAYER] piston .
2.
Turn the [Select/Menu] knob to move the cursor to Mode .
3.
Turn the [Value/Exit Menu] knob to select Prelude .
4.
Press the [PLAY] piston .
Automatically selected Preludes will play continuously.
MEMO
Press the [STOP] piston; the [PLAY/PAUSE] piston will blink, and the
Prelude will stop automatically at end of the Prelude. To stop Prelude,
press the [STOP] piston again.
Changing Hymn book
1.
Press [HYMN PLAYER] piston .
2.
Turn the [Select/Menu] knob to select “Book .”
3.
Turn the [Value/Exit Menu] knob to select Hymn book .
This setting will return to the default value when you turn off the
power, but you can store the setting so that it will be remembered even
after the power is turned off. For details, refer to “Storing Your Settings
(Customize)” (p. 24).
