34
Recording Your Performances
Copying a Saved Song
MEMO
•
You can’t copy a preset song.
•
Up to 99 songs can be saved in internal memory, and up to 999 songs can be saved in one USB flash drive unit.
1.
Connect your USB flash drive to the USB memory connector .
2.
From the main screen, press the [STOP] piston to access the “Song Recorder” screen .
3.
Turn the [Select/Menu] knob to select “Copy Song .”
4.
Press the [Select/Menu] knob to access the “Copy Song” screen .
5.
Turn the [Select/Menu] knob to select “Copy from,” and then turn the [Value/Exit Menu] knob to select the media that contains the
data you want to copy .
Setting
Explanation
INTERNAL
Copy song data from the organ’s internal memory to the USB flash drive.
USB
Copy song data from the USB flash drive to the internal memory.
6.
Turn the [Select/Menu] knob to select the “Name” field, and turn the [Value/Exit Menu] knob to select the song that you want to
copy .
MEMO
In the “Name” field, choose “Copy All” if you want to copy all of the performance data.
If you choose “Copy All,” select a copy-destination number that will allow all of the data to be copied. For example, if you are copying the 10 songs
saved in internal memory to USB flash drive, choose number 990 or lower as the copy-destination number.
7.
Turn the [Select/Menu] knob toward the right to select the “No .” field, and turn the [Value/Exit Menu] knob to select the desired
copy-destination number .
8.
Press the [SET] piston to execute the copy .
If you decide to cancel, press the [Value/Exit Menu] knob.
NOTE
ѥ
ѥ
Never disconnect the USB flash drive or turn off the power before the copy has been completed. Otherwise, you risk damaging the USB flash drive or the
organ’s internal memory, rendering it unusable.
9.
When copying is finished, the song name will change to the copy-source song name .
10.
Press the [Value/Exit Menu] knob twice to return to the main screen .
If you want to name the data you’re saving
You can assign a name to the performance data, memory banks, and voice setup data.
1.
At the “Name” item, press the [Select/Menu] knob .
2.
Turn the [Select/Menu] knob to move the cursor to left or right, and turn the [Value/Exit Menu] knob to change the character at
the cursor location .
3.
Press the [SET] piston to finalize the name .
You can use the following characters.
(space)
Operation
Explanation
Press [M–] piston
Deletes a character.
Press [M+] piston
Inserts a space.
