27
Storing a Combination of Stops
Using Memory Banks
The state of the general memory pistons and the division memory pistons can be stored as a “memory bank.”
M02
M01
Storing the Combination of Memory Pistons as a Memory Bank
1.
Use the memory bank select [M–]/[M+] pistons to select the memory bank number to be used for storage .
2.
While holding the [SET] piston, press one of the general memory pistons or division memory pistons .
NOTE
ѥ
ѥ
Please be aware that the information that was previously stored in the memory bank will be overwritten and lost.
Recalling a Registration from a Different Memory Bank
1.
From the main screen, use the memory bank select [M–]/[M+] pistons to select the number of the memory bank that you want to
recall .
MEMO
If you hold down the memory bank select [M–]/[M+] piston, the memory bank number will continue changing consecutively.
NOTE
ѥ
ѥ
Simply pressing a memory bank select [M–]/[M+] piston will not recall a registration.
2.
Press one of the general memory pistons or division memory pistons .
Recalling Registrations Successively
Simply by pressing the [NEXT] piston, you can successively recall the registrations that are stored at the general memory pistons.
For example, if you will be performing a recital, you can use the memories to store your registrations in the order in which you will be using them, and
then smoothly switch to the next registration while you perform.
Each press recalls the next registration
M01
M02
