30
Practicing Along with a Preset Song or Performance Data
You can practice by playing along with preset songs (demo songs) that are built into the organ, or with performance data that you’ve recorded from your
own playing.
MEMO
Songs can also be played back in succession. Start from the state where playback is stopped. Then, using the [Select/Menu] knob, select “Play Mode.”
Next, turn the [Value/Exit Menu] knob to change the setting to “CHAIN.”
Setting
Explanation
OFF
Play back only the selected song
CHAIN
Consecutively play back all the songs on the selected media
Selecting and Playing Back a Song
1.
If you want to play back a song from USB flash drive, connect your USB flash drive to the USB memory connector .
2.
From the main screen, press the [STOP] piston to access the “Song Recorder” screen .
3.
Turn the [Select/Menu] knob to select “Source .”
4.
Turn the [Value/Exit Menu] knob to select the media on which the song is stored .
Setting
Explanation
USB
Play back song data from USB flash drive
INTERNAL
Play back song data from internal memory
PRESET
Play back built-in preset song data (demo song)
5.
Turn the [Select/Menu] knob to select “Song .”
6.
Turn the [Value/Exit Menu] knob to choose the song that you want to play back .
If a screen like the following appears
If internal memory contains performance data that has not been saved, the following message will appear when you attempt to select a saved song.
•
If you want to discard the performance data without saving it, press the [SET] piston.
•
If you don’t want to erase the performance data, press the [Value/Exit Menu] knob. Save the performance data as described in “Saving a Recorded
Song” (p. 32).
7.
Press the [PLAY/PAUSE] piston to play back the song data .
•
“PU” is shown as the measure number if the song starts on a weak (“pick up”) beat.
•
You can pause the playback.
Press the [PLAY/PAUSE] piston. Playback will resume from the same location when you press the [PLAY/PAUSE] piston once again.
8.
To stop playback, press the [STOP] piston .
