24
Making Settings in the Menus
Storing Your Settings (Customize)
The following settings will return to their default state when you switch off the organ’s power, but you can use the procedure described below to store
these settings.
Setting
Group
Default Voice Palettes (*)
VOICING
“MIDI coupler” screen settings
“Stop Library” screen settings
Loaded Voice Setup (p . 37)
“Room Modeling” screen settings
SYSTEM
“Console” screen settings
“Tremulant” screen settings
“Exp . Pedal” screen settings
“Audio” screen settings
“MIDI” screen settings
“Guide Tone” and “Guide Volume” settings in “Song
Recorder” screen
Hymn book
* What is the Default Voice Palette?
The “Default Voice Palettes” specifies which variation sound will be heard when you turn on a specific stop.
If you specify the variation sounds that you frequently use, you’ll be able to play those variation sounds simply by selecting those stops, without needing
to select the variation sounds.
1.
Hold down the [SET] piston and press the [0] piston .
Confirmation screen will appear
2.
Turn the [Value/Exit Menu] knob to choose the group .
•
If you choose “VOICING,” the VOICING group settings will be saved.
•
If you choose “SYSTEM,” the SYSTEM group settings will be saved.
3.
Press the [SET] piston to store the settings .
If you decide to cancel, press the [Value/Exit Menu] knob.
NOTE
ѥ
ѥ
Never turn off the power before the storage has been completed. (Wait until the “Executing” indication is no longer shown.)
