28
Storing a Combination of Stops
Using Memory Banks with USB Memory
Preparing USB Flash Drive
1.
For preparing the USB Memory, refer to “Formatting a USB Flash Drive” (p . 36) .
Selecting USB Memory Folder
The capacity of an external memory device is much greater than that of the organ’s internal combination memory. In order to make easy use of this
additional capacity, Rodgers uses the concept of memory folders. Like a file folder, a memory folder is used to store groups of information on the memory
device. Each folder can contain a copy of each console memory bank, plus a copy of the Crescendo sequence, and TUTTI. Folders on a memory device are
labeled A–Z.
This means that a single device can contain up to 26 different copies of all Memory Banks, Crescendo Sequences, and TUTTI.
1.
Connect your USB flash drive to the USB memory connector .
2.
From the main screen, press the [Select/Menu] knob .
3.
Turn the [Select/Menu] knob to select “USB Memory .”
4.
Press the [Select/Menu] knob to access the “USB Memory .”
5.
Turn the [Value/Exit Menu] knob to select a USB Memory folder A-Z .
Storing the Combination of Memory Pistons as a Memory Bank to USB Memory
1.
Use the memory bank select [M–]/[M+] pistons to select the memory bank number to be used for storage .
2.
While holding the [SET] piston, press one of the general memory pistons or division memory pistons .
NOTE
ѥ
ѥ
Please be aware that the information that was previously stored in the memory bank will be overwritten and lost.
Recalling a Registration from a Different Memory Bank from USB Memory
1.
From the main screen, use the memory bank select [M–]/[M+] pistons to select the number of the memory bank that you want to
recall .
MEMO
If you hold down the memory bank select [M–]/[M+] piston, the memory bank number will continue changing consecutively.
NOTE
ѥ
ѥ
Simply pressing a memory bank select [M–]/[M+] piston will not recall a registration.
2.
Press one of the general memory pistons or division memory pistons .
