Rodenstock REM 3000, Instruction Manual

Page: 94 / 109

6. TROUBLESHOOTING
Check the following first when you find problems with the
instrument. If the problem is not solved even after
checking the applicable item listed below, contact our local
distributor.
n
Do not remove the cover of the instrument.
Otherwise, you may be directly exposed to high voltage sections.
n Do not take any actions other than those specified
below.
n If the problem is not solved even after checking
the applicable item listed below, contact our local
distributor.
● The power lamp or monitor does not turn on when the
power switch is turned on.
Faulty power plug
Check that the power plug is firmly
connected to the instrument and power
outlet.
Check that the power cord is not cracked,
torn, etc.
Power not supplied
Check that power is supplied to the power
outlet to which the power cord is
connected.
Blown fuse
Check for blown fuses, and replace fuses
as needed. (Refer to “5. 5. 2 Fuses.”) If
the replaced fuse blows again, there may
be other problems. Contact our local
distributor for repair.
6-1
?
?
?