Rodenstock REM 3000, Instruction Manual

Page: 42 / 109

3.3 Capturing Images
3.3.1 Precautions
Tell the patient to remove their eyeglasses or contact
lenses, and explain the capturing procedure before starting
the capturing process.
3.3.2 Entering patient information
n
If the patient information is already entered for the
captured data and you wish to replace the patient
information using the following method, make sure
that both the patient information and measurement
data belong to the same patient.
n Only the last 14 digits of the ID are shown in the ID
field on the capturing screen. Be sure to check that
the ID is correct on the Patient Information screen.
a) Entering patient information with the touch panel
(1) (2)
1) By touching the ID field (1) or Name field (2) on the top
of each screen, the patient information entry screen
(Fig. 2) is displayed. Enter ID number and patient's
name as necessary.
(Fig. 1)
(Fig. 2)
(6) (7)
(1)
(2)
(3)
(4)
(5)
2) Touch the ID field (1), Name field (2), Date of Birth field
(3) or Physician field (5). The alphabetic keypad
appears. Enter the ID, patient's name, date of birth,
and physician's name as needed. However, period “.”
and space cannot be used in ID numbers. (Refer to
“3.3.2(d) Entering characters.”)
3) Press either the “male” or “female” Sex button (4)
depending on the sex of the patient.
4) After the patient information is entered, touch the “OK”
button (6) to apply the entered information and return to
the capturing screen. Press the “Cancel” button
(7) to clear the entered information and return to the
capturing screen.
3-6
1& 15