(5)
Up/down ring
Moves the head unit up and down. Moving the ring up and down moves the head unit for
rough positioning. Turning the ring moves the head for fine positioning.
(6)
Hand rest
Place your hand on the rest to operate the joystick. Sliding the rest forward, backward, to the
right, and left moves the head unit in the corresponding direction for rough positioning.
(7)
Eye level mark
Reference mark when aligning the height of the patient's eye
(8)
Membrane switch
Used to make various settings and operations.
(9)
“CLEAR” switch
Deletes all the examination data.
(10)
“MODE” switch
Switches the alignment mode between automatic and manual.
(11)
“PRINT” switch
Prints the captured result on a connected external printer.
(12)
“ANALYSIS” switch
Analyzes the captured endothelial image automatically.
(13)
Link switch
Connects to the external devices to send data.
(14)
“PACKING” switch
Pressing this button for 3 seconds moves the head unit to the lowest position for packing (lower
dead center).
(15)
“CHIN REST” switch
Touching the UP and DOWN buttons moves the chin rest up and down respectively.
(16)
Power lamp
Stays lit while the instrument is turned on.
(17)
USB-D connectors
Connect the PC and printer here. There are two ports.
(18)
USB-H connector
Connects the barcode reader, card reader, and supported digital printers. There are two
ports.
2-2
Summary of Contents for REM 3000
