(Fig. 4)
(Fig. 5)
(2) (3) (4)
(5) (6)
n
When selecting cells using the L-count function,
touch the cells on the orange line indicating the
specified area (left side or bottom of the frame),
and do not touch the cells on the blue dashed line
(top or right side of the frame). (Do not touch the
gray cells in Fig. 4.)
n
The L-count Assist function is an auxiliary function
for the L-count function. Note that the physician
must select cells individually.
“Counted cells display field” (3)
Indicates the number of cells selected and touched by
the physician on the screen. Cell density is calculated
using this value and the area of the range to be
analyzed.
“Eraser” button (4)
To delete the orange points on touched cells, touch the
“Eraser” button (4), and then touch the points to be
deleted. These are deleted and the value in the
“Counted cells display field” decreases accordingly.
To select the cells again, touch the “Eraser” button (4)
again. The status returns to the cell selection mode.
“Undo” button (5)
Cancels cell selection operations by touching the
screen, one operation at a time.
“Redo” button (6)
Executes operations cancelled by the “Undo” button (5),
one operation at a time.
<When using L-count function on captured image
selection screen>
Similar to when using the L-count function on the captured
image selection screen, touch the “Area” button (1), and the
“L-count” button (2) appears, allowing you to perform
analytical calculation using the L-count function on the edit
screen (Fig. 5).
3-27
Summary of Contents for REM 3000
