12
Publication CC-QS015A-EN-P - November 2009
Chapter 1
Product Integration
Set Up the Configuration and Diagnostic Software
Follow these steps to install and set up the Configuration and Diagnostic software.
1.
If you do not have the Configuration and Diagnostic software, go to
http://www.ab.com/safety/logic/relays/msr4x/
to download the Configuration Tool for
MSR42 relay, GuardShield Micro 400 and Safe2/4 Light Curtains.
a. Go to Related Links on the right side of the page and choose ‘Safety Software [ZIP]’.
b. Save the zip file to your personal computer.
c. Unzip the file.
d. Run the SetupDiagnosticAndConfiguration_V
xxx
.exe file to install the software.
2.
Start the Configuration and Diagnostic software.
3.
Click MSR42 and then OK.
4.
If this is the first time you have used
the Configuration and Diagnostic
software, register the software.
a. From the Options menu, choose
User Registration.
b. Type in your information and
click OK.
TIP
It is not necessary to change the password for this building block. The default password is
ABGM.
