manualshive.com logo in svg

Rockwell Automation Allen-Bradley 2198-CAPMOD-1300, User Manual

The Rockwell Automation Allen-Bradley 2198-CAPMOD-1300 is a cutting-edge product designed for seamless industrial automation. Enhance your efficiency with this state-of-the-art device by accessing the comprehensive User Manual, available for free download at manualshive.com. Maximize your productivity by harnessing the power of this innovative solution.

Share
Download
background image

12

Rockwell Automation Publication 2198-UM001D-EN-P - May 2014

Preface

Additional Resources

These documents contain additional information concerning related products 
from Rockwell Automation.

You can view or download publications at

http://www.rockwellautomation.com/literature

. To order paper copies of 

technical documentation, contact your local Allen-Bradley distributor or 
Rockwell Automation sales representative.

Resource

Description

Kinetix 5500 servo drives Installation Instructions, publication 

2198-IN001

Information on mounting and wiring the Kinetix 5500 servo drive.

Kinetix 5500 Feedback Connector Kit Installation Instructions, publication 

2198-IN002

Information on installing and wiring the Kinetix 5500 motor feedback connector kit.

Kinetix 5500 AC Line Filter Installation Instructions, publication 

2198-IN003

Information on installing and wiring the Kinetix 5500 AC line filters.

Kinetix 5500 Capacitor Module Installation Instructions, publication 

2198-IN004

Information on installing and wiring the Kinetix 5500 capacitor module.

Kinetix 5500 Shared-bus Connector Kit Installation Instructions, publication 

2198-IN005

Information on installing the Kinetix 5500 shared-bus connector kits.

Hiperface-to-DSL Feedback Converter Kit Installation Instructions, publication 

2198-IN006

Information on installing the Hiperface-to-DSL feedback converter kit.

Kinetix 300 Shunt Resistor Installation Instructions, publication 

2097-IN002

Information on installing and wiring Kinetix 300 shunt resistors.

System Design for Control of Electrical Noise Reference Manual, 
publication 

GMC-RM001

Information, examples, and techniques designed to minimize system failures caused 
by electrical noise.

EMC Noise Management DVD, publication GMC-SP004

Kinetix Motion Control Selection Guide, publication 

GMC-SG001

Overview of Kinetix servo drives, motors, actuators, and motion accessories designed 
to help make initial decisions for the motion control products best suited for your 
system requirements.

Kinetix 5500 Drive Systems Design Guide, publication 

GMC-RM009

System design guide to select the required (drive specific) drive module, power 
accessory, feedback connector kit, and motor cable catalog numbers for your 
Kinetix 5500 drive and Kinetix VP motor motion control system.

Kinetix Rotary Motion Specifications Technical Data, publication 

GMC-TD001

Product specifications for Kinetix VP (Bulletin VPL, VPF, and VPS), MP-Series™ 
(Bulletin MPL, MPM, MPF, and MPS), Kinetix 6000M (Bulletin MDF), TL-Series™, 
RDD-Series™, and HPK-Series™ rotary motors.

Kinetix Linear Motion Specifications Technical Data, publication 

GMC-TD002

Product specifications for MP-Series (Bulletin MPAS ballscrew, MPAR, and MPAI) and 
LDAT-Series linear actuators.

Kinetix Servo Drives Specifications Technical Data, publication 

GMC-TD003

Product specifications for Kinetix Integrated Motion over the EtherNet/IP network, 
Integrated Motion over sercos interface, EtherNet/IP networking, and component 
servo drive families.

Kinetix Motion Accessories Specifications Technical Data, publication 

GMC-TD004

Product specifications for Bulletin 2090 motor and interface cables, low-profile 
connector kits, drive power components, and other servo drive accessory items.

Rockwell Automation Configuration and Selection Tools 
website 

http://www.rockwellautomation.com/en/e-tools

Motion Analyzer application analysis software for drive/motor sizing.

Online product selection and system configuration tools, including AutoCAD (DXF) 
drawings.

Rockwell Automation Product Certification, 
website 

http://www.rockwellautomation.com/products/certification

For declarations of conformity (DoC) currently available from Rockwell Automation.

Integrated Motion on the EtherNet/IP Network Configuration and Startup User Manual, 
publication 

MOTION-UM003

Information on configuring and troubleshooting your ControlLogix® and 
CompactLogix™ EtherNet/IP network modules.

GuardLogix 5570 Controllers User Manual, publication 

1756-UM022

 

Information on designing, installing, programming, or troubleshooting control 
systems that use GuardLogix 5570 controllers.

GuardLogix 5570 Controller Systems Safety Reference Manual, publication 

1756-RM099

 

Information for development, operation, or maintenance of a GuardLogix 5570 
controller-based safety system that uses the Studio 5000 Logix Designer

™

 application.

 Safety Products Catalog website 

http://www.ab.com/catalogs

Information regarding Allen-Bradley safety products, including safety relays, light 
curtain, and gate interlock applications.

ControlFLASH Firmware Upgrade Kit User Manual, publication 

1756-QS105

For ControlFLASH™ information not specific to any drive family.

National Electrical Code, published by the National Fire Protection Association of Boston, MA

An article on wire sizes and types for grounding electrical equipment.

Rockwell Automation Industrial Automation Glossary, publication 

AG-7.1

A glossary of industrial automation terms and abbreviations.

Summary of Contents for Allen-Bradley 2198-CAPMOD-1300





















































































































































































































































Reviews:

No comments

Related manuals for Allen-Bradley 2198-CAPMOD-1300

D+H SHD 54/450-V Original Instructions Manual preview
SHD 54/450-V
Brand: D+H Pages: 16
Lenze 1.5 24 A Series Mounting Instructions preview
1.5 24 A Series
Brand: Lenze Pages: 70
YASKAWA GA700 GA700 Series Manual preview
GA700 GA700 Series
Brand: YASKAWA Pages: 32
Nord Drivesystems SK 750E Series Manual preview
SK 750E Series
Brand: Nord Drivesystems Pages: 153
Fujitsu MAN3184 SERIES Specifications preview
MAN3184 SERIES
Brand: Fujitsu Pages: 163
Bosch Rexroth MS2S Operating Manual preview
Rexroth MS2S
Brand: Bosch Pages: 50
Bosch Rexroth EC302 Installation Instructions Manual preview
Rexroth EC302
Brand: Bosch Pages: 66
Bosch rexroth Servodyn-D Manual preview
rexroth Servodyn-D
Brand: Bosch Pages: 72
Bosch MSK030B NSNN Series Project Planning Manual preview
MSK030B NSNN Series
Brand: Bosch Pages: 178
Bosch MSK030B-0900-NN Project Planning Manual preview
MSK030B-0900-NN
Brand: Bosch Pages: 282
Toshiba ACE-tronics G9 ASD Installation And Operation Manual preview
ACE-tronics G9 ASD
Brand: Toshiba Pages: 297
BONFIGLIOLI Active Cube Applications Manual preview
Active Cube
Brand: BONFIGLIOLI Pages: 40
Ismatec BVP Standard Operating Manual preview
BVP Standard
Brand: Ismatec Pages: 36
Ismatec ISM 918 Operating Manual preview
ISM 918
Brand: Ismatec Pages: 56
agrifac Condor C03 Installation Manual preview
Condor C03
Brand: agrifac Pages: 26
Iomega REV 120 Quick Install Manual preview
REV 120
Brand: Iomega Pages: 24
Rockwell Automation Allen-Bradley PowerFlex 20-750-EMC2-F5 Installation Instructions Manual preview
Allen-Bradley PowerFlex 20-750-EMC2-F5
Brand: Rockwell Automation Pages: 20
degdrive DGI900 User Manual preview
DGI900
Brand: degdrive Pages: 251

Brands by name

Popular brands

Load more brands