RoboJet Air AH-157, Instruction Manual & Warranty

Page: 16 / 64

EN
When dust bin is full, the error message display will show “00”.
Please clean up the dust bin prior to the use of the robot again.
2. Remote Control Function
All function buttons on the robot’s front panel ale available on the remote control. There are some
additional unique buttons on the remote control shown below.
1: Spot
2: Special Bounce
3: Wall Following
4: Zig-zag
5: Polygonal
A: Automatic (the combination of patterns)
Power Button: Press this button to activate or to
shut down the robot.
Start/Stop Button: Press this button to activate the robot perform
or to stop the cleaning process.
Direction Buttons: Directional buttons
(Left/Right/Reverse/Forward) for users to control the movement
manually.
Timer Button: To set up the cleaning time.
Home Button: This function is to interrupt the robot’s cleaning
process and to command it to go back to the Recharging Home
Base directly.
Mode Button: To manually set up the cleaning mode of the
robot. Each press will command the robot to change its
cleaning mode in the sequence of the following patterns.
Users may also find the current pattern code on the robot’s
display panel.
UV Button: Press this button to activate or to shut down
the UV light.
Caution