RoboJet Air AH-157, Instruction Manual & Warranty

Page: 23 / 64

EN
1. Turn on the unit and make sure it enters the standby mode
，
press “Collided” until the unit beeps twice
and LED displays shows CD. This will enable the Wifi function and you can control the unit via APP. Once
successfully connected to the network via APP the robot will beep and the blue light will turn on.
If not further connection within 5 seconds the Wifi will go back to suspended mode.
1. Access to wifi
2. Log out the wifi
2. To disable / log out of Wifi mode once connected press the “Vac” key until the robot beeps twice. To
enable Wifi mode you will need to perform operation from 1. Again.
3. If Wifi networks changes you will need to perform operation from 1. again and also reconnect via APP.
Press "COLLIDED" key until the displays
shows "Cd".
Display “Cd”
Hold “VAC” button until you hear
sound twice
Instruction for enabling or disabling the Wifi