RoboJet Air AH-157, Instruction Manual & Warranty

Page: 17 / 64

EN
3. Cleaning Operation
VAC Button: Press this button to activate or to shut down
the vacuuming motor.
Soft-Touch Button: Press this button to activate or to shut
down the soft-touch function.
1. Before the robot starts cleaning, it is suggested to clean up small items,
like clothing, power cords, cables, and loose fringes of rugs.
2. Check of the dust-bin is full. If it is, empty it out.
3. Press the Power Button to activate the robot.
4. Use the remote control to set up the preferred cleaning time or cleaning
cycle.
5. User may interrupt the robot’s cleaning cycle at any time by pressing the
Start/Stop button either on the robot panel or the remote control.
By pressing the button again, the robot will resume the previous cleaning
cycle.