4
4.1 Due to high temperature, the appliance should be located away from furniture and curtains.
4.2 Children and adults should be alerted to the hazards of high surface temperature and should stay
away to avoid burns or clothing ignition.
4.3 Young children should be carefully supervised when they are in the same room as the appliance.
4.4 Clothing or other flammable material should not be placed on or near the appliance.
4.5 Any safety screen or guard removed for servicing an appliance must be replaced prior to operating
the appliance.
4.6 Installation and repair should be carried out by a CORGI registered service agent. The appliance
should be inspected before use and at least annually by a CORGI registered service agent. More
frequent cleaning may be required due to excessive lint from carpeting, bedding material, etcetera.
It is imperative that control compartments, burners and circulating air passageways of the
appliance be kept clean.
4.7 The glass door is of a special heat resisting type, and if damaged must be replaced with the proper
spare (see Section 16.0 Short List of Parts).
4.8 WARNING: Do not operate appliance with the glass front removed, cracked or broken.
4.9 WARNING: Do not subject the glass door to impact of any kind as breakage may occur.
4.0 SAFETY
5.0 UNPACKING
The heater is packed in a carton together with the following items (See Fig. 1):-
1. Gasket pack comprising flue and air duct gaskets.
No.
Description
ÿ
Part No.
2. Pack of fittings comprising: 4
Cable fixing eyelets
822006
4
Woodscrews No. 10 x 38mm
4
Wall fixing brackets
990251
4
No. 8 Self Tapping Screws x10mm
810490
4
Wall plugs
820343
2
Fixing cables
992424
2
Cable adaptors
994839
2
Grub screws
810940
3
M4 x 10mm Taptite screws (air duct) 810327
2
No. 6 Self Tapping Screws x 10mm
810776
3. Foam seal pack.
822092.
4. A template representing the backplate full size; indicating the positions of the air inlet duct and eyelet screw positions.
5. The fuel effect.
Remove the items and keep in a safe place. Lay the heater on its back in a safe place.
810240
Fig. 1
GASKET
GASKET
SCREW
INNER
AIR DUCT
INNER
FLUE DUCT
SCREW
TERMINAL GUARD
(OPTIONAL EXTRA)
FOAM SEALING STRIP
FLUE
SEALING TAPE
TERMINAL
WALL PLUG
SCREW
