© RLS Wacon analytics GmbH +49 (0)5121 281260
July 2022
Subject to
change without notice
Pag
e
45
Display with value input
Numbers are entered via a display keyboard. You can move the cursor with the arrow keys [
◀
], [
▶
],
[
▲
] and [
▼
] of the unit. The currently set numerical value and the valid input range are also
displayed in the input mask.
You see an input keyboard. Now use the arrow keys to move the black cursor to the desired digit
and press the [OK] key.
The selected digit appears in a frame on the left. Repeat the entry until the desired number appears
in the frame. Now move the cursor to the OK field on the keyboard and press the [OK] key.
You will see the following information:
Current:
currently set value
Minimum:
smallest adjustable value
Maximum:
largest adjustable value
If the value at "Current" corresponds to your wish, you do not need to enter
the number again and can immediately move the cursor to the OK field in the
keyboard and confirm with the [OK] key.
In the flush time example below, a flush time between 15 and 1800 seconds can be set. The
currently programmed flush time is 120 seconds.
After entering a flush time of 90 seconds, confirming with the [OK] button overwrites the current
flush time with 90 seconds.
Operation
Figure 29: Flushing time