RLS Wacon SYCON 3000 C, Operating Manual

Page: 22 / 37

Changing and calling up the programme data
Parameters of the output functions, Activation of the buzzer
18
SYCON
3000 C
Output function: Signal relay
Fault messages
S t e p n o . : 6 . 9
R F | N I | B V | V H | V L |
F a u l t f i l l i n d i A
K T I V
▼ ► #
You can programme which fault mesages cause the relay of the output function
"Signal relay" to be activated.
Using the "#" key, choose between the display "-" and "|".
"-" = No activation of the fault relay
"|" = Activation of the fault relay
RF = Refill indicator VH = Measured value too high
NI = No indicator (Stop) VL = Measured value too low
BV = Blank value too low
7. Activation of the buzzer
S t e p n o . : 7 . 1
I N | B V | V H | V L | L E |
B u z z . i n d i c . l a c k D E A C T
▼ ► #
Programme the events for which the built-in buzzer is to be activated.
Using the "#" key, choose between the display "-" and "|".
"-" = No activation of the buzzer
"|" = Activation of the buzzer
IN = Indicator deficient VL = Measured value too low
BV = Blank value too low LE = Limit exceeded
VH = Measured value too high
Buzzer
7.1
IN BV VH VL LE
Output
Signal relais
yes
?
Fault messages
6.9
RF NI BV VH VL
6.*
no
8.1