Operating
displays
LED control lamps
2
SYCON
3000 C
Operating displays
LED control lamps
Coloured control lamps indicate the most important operating states:
The control lamps "Soft water" and "Hard water" display the result of the last analysis.
During a new analysis, the control lamps "Analysis“ and the lamp displaying the last result (i.e. "Soft water" or
"Hard water") blink.
If both the control lamps "Soft water" and "Hard water" are blinking, no analysis result is available, e.g. after
the instrument has been switched on.
In the event of a malfunction or disorder, the control lamp "Fault" blinks.
Additional information can be found on the LCD display.
MT 4A
ON
F1
START
FLUSH
10 m
2 *
F2
F3
0 .9 0 °m g /l
Limit
> 0.5
KEY
Fuse
Power switch
LED - control lamps
LCD - display
Keys
Soft water ( g ree n )
Hard water (red)
Fault (red)
Analysis (yellow)
