1. Declaration of incorporation
28
Sources for the harmonised standards according to article 7, paragraph 2:
EN ISO 12100
Safety of machinery – General principles for design – Risk assessment and
risk reduction (ISO 12100:2010)
The manufacturer or the person authorised are obliged to hand over the special documents for
the partially completed machine to the national authorities on reasoned request. This
transmission is carried out electronically.
The commercial protective rights remain unaffected by this!
Important note! The partially completed machine must not be put into operation, until, if
required, it has been determined that the machine in which the partially completed machine is to
be installed complies with the regulations of this guideline.
Minden / 03.07.2017
Technical Director
Location / Date
Signature
Signatory’s position
Minden / 03.07.2017
CEO
Location/Date
Signature
Signatory’s position
