1. Declaration of incorporation
27
D
e
u
ts
ch
E
n
g
li
sh
Fr
a
n
ca
is
E
sp
a
n
o
l
It
a
li
a
n
o
1.1 Declaration of Incorporation
As set out in Machinery Directive 2006/42/EC, Annex II, 1.B for partly completed machinery
Description and identification of the partly completed machine.
Product/manufacture:
see type plate label on the front page of these assembly instructions
Type:
see type plate label on the front page of these assembly instructions
Serial number:
see type plate label on the front page of these assembly instructions
Project number:
see type plate label on the front page of these assembly instructions
Order:
see type plate label on the front page of these assembly instructions
Function:
electro-motorised extracting and retracting of the inner profile for suitabil-
ity of a linear movement.
The following basic requirements of Machinery Directive 2006/42/EC are applied and fulfilled:
1.1.5, 1.3.2, 1.3.3, 1.3.9, 1.6.3, 4.1.2.3, 4.1.3, 4.3.3, 4.4.1, 4.4.2
Moreover, we declare that the special technical documents have been created according to
Appendix VII Part B.
The manufacturer declares explicitly that the partially completed machinery meets all the relevant
provisions of the following EC directives:
2011/65/EC
Directive 2011/65/EC of the European Parliament and of the Council from
June 8th, 2011 on the restriction of the use of certain hazardous substanc-
es in electrical and electronic equipment. 2011 on the restriction of the use
of certain hazardous substances in electrical and electronic equipment.
Manufacturer
RK Rose+Krieger GmbH
Potsdamer Straße 9
D-32423 Minden, Germany
The person in the community that is authorised to compile the
relevant technical documents.
Michael Amon
RK Rose+Krieger GmbH
Potsdamer Straße 9
D-32423 Minden, Germany
