Rizzoli T Art Basic, Instructions Manual

Page: 90 / 144

ENGLISH
88
The regulation of the combustion air must be ful-
ly opened during the first minutes of combustion,
then if slower combustion is desired, the entry of
air can be reduced by acting on the primary air
lever. The combustion air flow rate also depends
on the temperature in the combustion chamber
and on the actual draft. The nominal power of the
thermostove is obtained with 6-7 logs with a total
weight of 7 kg and a length of 25 - 33 cm and with
100% combustion air adjustments.
Powering the thermostove with the maximum
amounts allowed for long periods can reduce the
life of the thermostove, while if the maximum
quantities are exceeded, parts of the thermo-stove
may be damaged, voiding the warranty.
Secondary air is already set to work correctly in
standard installation conditions. In case of ex-
cessive accumulation of embers in the combus-
tion chamber or in general when it is necessary a
bigger quantity of primary air, it is possible to use
the addictive regulations in the lower vain below
the ash vain, accessible by opening the door (see
picture 20). The position towards internal is set
by manufacturing and it is the one of normal use.
The extraction of the door lever closes the flow of
secondary air.
On the T series thermostoves there are two fixed
air inlets for cleaning the glass, one in the lower
part of the fire door and an auxiliary in the upper
part.
By default both adjustments are fixed and set to
their maximum opening, so as to allow optimal
combustion and maintenance of the clean glass of
the fire door.
In the particular case in which the thermostove
is installed on a chimney characterized by a par-
ticularly high draft, there could be an influx of
4.4 SECONDARY AIR REGULATION
WARNING! Do not open the fire door during combustion, as otherwise smoke may
escape. The thermostove is designed to be used with the closed fire door.
Picture 19A – Regulation of primary and secondary
air. The regulator opens rolling the
hand grip clockwise.
Picture 19B – Auxiliary regulation of the primary air.
The valve is open in correspondence
of the position indicated by letter
“A” while it is closed in the position
indicated with letter “B”.
A
B
A
A B
B