Rizzoli T Art Basic, Instructions Manual

Page: 82 / 144

ENGLISH
80
2.11 FIRST LIGHTING
2.12 SETTLEMENTS
Before starting to use the thermostove, remove
the packaging materials in the device. Be sure
that the thermostove is connected to a working
heating system with water inside the boiler.. We
suggest to make a first lighting of the device just
to verify the correct installation. The first lighting
must be done with moderate fire, using little wood
broken in small pieces. In the next lightings you
can progressively increase the load of combustible.
During the first lightings some smell due to pro-
cessing residuals might happen. This phenomenon
is normal, it requires the ventilation of the room
and will disappear quic
All the refractory materials inside the stove experi-
ence a settlement process that may generate small
holes on the bricks, such holes do not preclude an-
yway the working of the stove.
Other settlements may involve other parts of the
stove so during the heating and cooling phases
you might hear light noises. These symptoms do
not absolutely preclude the use of the stove and
fade out till disappearance with the constant use
of the stove.
WARNING! During the first lightings of the thermostove T-Chef model it is recommended
to keep the oven door open to allow the expulsion of eventual working residuals,
otherwise the thermostove could suffer damages.