Rishabh Master 3440iDL 0.2SS, Operating Manual

Page: 44 / 75

3.2.8 Brightness & Contrast
The brightness & contrast of the TFT LCD screen can be varied by
the user by sliding the sliders. Touching the “ key” will conrm
the current brightness contrast setting.
Touching the DEFAULT key will set brightness and contrast as per
factory settings. Touching the BACK key will move back to the setup
menu without making any changes.
3.2.9 RGB Color Code (only for 3 Phase 3 Wire / 4 Wire)
This screen allows user to set the values of Red, Green and Blue
components of colors used to display the parameters of all three
phases.
Different colors can be assigned to each phase using combination of
Red, Green and Blue component values. L1,L2,L3 will be set to the
assigned color.
To set these values, touch the corresponding rectangular section, 0 to
9 digit input keypad will appear. After entering the value using this
keypad,user can conrm this value with a simple touch on “ key”.
“ key” is used to go back to previous screen.
OK
OK
140
R B G
L1
L2
L3
RGB COLOR CODE
0 0
255 204 191
0 255 0
RGB COLOR CODE
VALID RANGE IS : 0 to 255
The allowable range for these values is 0 to 255. If a value outside this range is entered, it will
display “ VALID RANGE IS : 0 TO 255”.
NOTE :
Colors similar to background are not recommended.
42