3.2.4.1.2 Limit output
This screen is for Limit output mode selection. It allows the user to set Limit output
corresponding measured value. After entering in Limit Output rst time(was disabled previously),
only “PARAMETER:” is displayed on screen. Now a simple touch on “PARAMETER:” will open
list of parameters, Refer TABLE 2 “Parameter for Analog & Limit output” for assignment. Now
after assignment of any parameter, list of following setting parameters will be displayed:-
3.2.4.1.2.1 LIMIT OUTPUT PARAMETER
3.2.4.1.2.2 ENERGY COUNT CONFIG
3.2.4.1.2.3 ENERGY TRIP POINT
3.2.4.1.2.4 ENERGY COUNT ON DELAY
3.2.4.1.2.5 PARAMETER CONFIG
3.2.4.1.2.6 TRIP POINT
3.2.4.1.2.1 Limit Parameter selection
This option allows the user to set Relay1 limit to corresponding measured parameter. A simple
touch on “PARAMETER” row will open screen having list of parameters. (Refer TABLE 2
“Parameters for Analog & Limit output”)
Touch on “ key” will conrm the setting.
Touching the “ key” will keep the old selected setting and will return to previous menu.
BACK
OK
OK
3.2.4.1.2.7 HYSTERESIS
3.2.4.1.2.8 ENERGIZING DELAY
3.2.4.1.2.9 DE-ENERGIZING DELAY
27
Summary of Contents for Master 3440iDL 0.2SS
Page 2: ......
