3.2.2.1.1 RS485 Address Setting
This screen applies to the RS 485 output only. This screen allows the
user to set RS485 address parameter for the instrument. This screen
can be accessed only from Communication Parameters List menu.
Here again 0 to 9 digit input keypad is provided to set RS485 address
& user can conrm this value with a simple touch on “ key”.
The range of allowable address is 1 to 247.
If value outside the range is entered, it will display “INVALID VALUE”
followed by the correct range of parameter.
3.2.2.1.3 RS485 PARITY
3.2.2.1.1 RS485 ADDRESS
3.2.2.1.2 RS485 BAUD RATE
3.2.2 Communication Parameter Selection :
After entering in the “COMMUNICATION PARAMETERS” list of following parameters will be
displayed
ENTER RS485 ADDRESS
RS485 ADDRESS
RS485 ADDRESS
INVALID VALUE
3.2.2.1 MODBUS PARAMETERS
3.2.2.2.3 DEFAULT GATEWAY
3.2.2.2.1 IP ADDRESS
3.2.2.2.2 SUBNET MASK
3.2.2.2 ETHERNET PARAMETERS
3.2.2.2.4 SERVER PORT
3.2.2.1 Modbus Parameters Setting
ENTER
21
Summary of Contents for Master 3440iDL 0.2SS
Page 2: ......
