3.2.7 Date & Time Settings
After entering in the “DATE AND TIME SETUP”, the user will be able
to change the DATE, MONTH, YEAR, HOUR & MINUTE individually
by touching the corresponding option.
The range for date is
10-10-2000 to 31-12-2099
and that for time is
00:00 to 23:59
.
Touching an option gives 0 to 9 digit input keypad to set the
corresponding value & user can confirm this value with a simple touch
on “ key” and cancel the change by touching the “ key”.
If invalid value is entered, it will display “INVALID VALUE” followed by
correct range of the parameter.
ENTER
BACK
ENTER THE DATE
DATE AND TIME SETUP
0
DATE AND TIME SETUP
2000
DATE
YEAR
01
MONTH
01
HOUR
11
MINUTE
10
3.2.6.5 Overcurrent Hysteresis Setting
Here 0 to 9 digit input keypad is provided to set the Overcurrent
Hysteresis & user can confirm this value with a simple touch on
“ key” and cancel the change by touching the “ key”.
The valid range is
1 to 20 % of nominal current
.
If value outside this range is entered, it will display “INVALID VALUE”
followed by correct range of parameter.
ENTER
BACK
ENTER OVR CRNT HYSTERESIS IN %
OVERCURRENT HYSTERESIS
0
.
The value decides the hysteresis for overcurrent detection.Hysteresis is the difference in
magnitude between the start and end threshold.
(Refer section 8 for details)
Note
: Changing Overcurrent Hysteresis would erase the Overcurrent data of PQ events.
41
Summary of Contents for Master 3440iDL 0.2SS
Page 2: ......
