Rishabh Master 3440iDL 0.2SS, Operating Manual

Page: 31 / 75

3.2.4.1.2.4 Energy Count ON Delay
Here 0 to 9 digit input keypad is provided to set the Energy Count On
Delay & user can confirm this value with a simple touch on “ key”.
and cancel the change by touching the “ key”.
The valid range is 1 to 9999 seconds.
If value outside this range is entered, it will display “INVALID VALUE”
followed by correct range of parameter.
Selecting Limit Output Parameter (see Section 3.2.4.1.2.1) other than
Active Import/ Active Export/ Capacitive/ Inductive/ Apparent Energy
allows the user select one of the following configurations:
High Alarm & Energized Relay
High Alarm & De-Energized Relay
Low Alarm & Energized Relay
Low Alarm & De-Energized Relay
3.2.4.1.2.5 Parameter Conguration
ENTER
BACK
SET ON DELAY IN SEC
RELAY-1 ON DELAY
LINE-NEUTRAL VOLTAGE
VL2
VL2 VL2
LINE-NEUTRAL VOLTAGE
VL2
VL2 VL2
LINE-NEUTRAL VOLTAGE
VL2
VL2 VL2
CT SECONDARY
5 AMPERE
1 AMPERE
LINE-NEUTRAL VOLTAGE
VL2
VL2 VL2
LINE-NEUTRAL VOLTAGE
VL2
VL2 VL2
LINE-NEUTRAL VOLTAGE
VL2
VL2 VL2
RELAY-1 CONFIGURATION
OK
BACK
HIGH ALARM & DE-ENERGIZED RELAY
LOW ALARM & ENERGIZED RELAY
HIGH ALARM & ENERGIZED RELAY
LOW ALARM & DE-ENERGIZED RELAY
OK OK
BACK
Touch on “ key” will conrm the setting and take back to the previous screen.
Touch on “ key” will take back to the previous screen.
(For details refer to section 9.2)
3.2.4.1.2.6 Trip Point
This screen applies to the Trip point selection for parameters other than Active Import/ Active
Export/ Capacitive/ Inductive/ Apparent Energy selected in Section 3.2.4.1.2.1. It allows the
user to set Trip point for instruments.
This screen allows the user to set ON Delay time in
seconds
for Relay Limit Assigned
Parameter. Refer Section 3.2.4.1.2.3 for details.
29