Rion KL-04, Instruction Manual

Page: 35 / 166

19
Preparation
Electromagnetic Stirrer (Option)
When measuring particles suspended in a fl uid, the sample fl uid must not be contaminated
and particles suspended in the sample fl uid must be equally dispersed to obtain a reliable
result.
The electromagnetic stirrer (option) can equally disperse particles suspended in the sample
fl uid by turning a stirring bar in the sample fl uid using external electromagnetic induction.
A remote micro type VARIOMAG HP40107 (Produced by H+P Labortechnik) is used as
an electromagnetic stirrer.
Controls and features
Electromagnetic stirrer
Installed in the sample stand of the KL-04.
Control cable
The plug connects to the control cable connector on the controller with.
Controller
Turns the power supply ON or OFF and adjusts the revolution speed of the stirring bar
by rotating the volume dial.
Volume dial
Turns the power supply ON or OFF and adjusts the turning frequency of the stirring
bar.
Turn the volume dial to the right for a higher revolution speed of the stirring bar. Turn
the volume dial all the way to the left to cut the power supply off.
Control cable connector
Connects to the control cable plug of the electromagnetic stirrer.
Power cord
Connects to the AC outlet.
Power cord
Electromagnetic stirrer
Volume dial
Control cable
Control cable connector
Plug
Controller