Rion KL-04, Instruction Manual

Page: 142 / 166

126
Audit Trail
Operations recording in the audit trail
For operations listed in the table below, audit trail information is recorded at the point
where the operation is completed, or where the fi le is created in the case of operations that
create a fi le upon completion.
For information on Class, Event, and Note in the table, see the section about the recording
format for each item on the next page.
Operation Class Event Note
Measu rement pa ra meter
change
fi le create “target fi le name”
Measurement parameter an-
notation change
fi le modifi ed “target fi le name”
Measurement data deletion fi le delete “target fi le name”
Output of measurement data
to fl oppy disk
fi le export fl oppy
Printing and PS fi le output fi le print “target fi le name”
Log-in operator log-in localhost
Log-out operator log-out localhost
Power-on system power-on
Power-off system power-off
Add operator operator_mgr create
“newly created operator
name”
Change operator privileges or
password of other operator
operator_mgr modifi ed
“name of operator with
changed privileges”
Operator has opened own
password change screen (in-
cluding no actual change)
operator password_modifi ed
Backup tape backup
“successful” or “fail”, and
checked item names
Restore tape restore
“successful” or “fail”, and
checked item names
Date/time change date modifi ed Date/time after it changes *1
Operator has opened network
setting screen
network modifi ed
Operator has opened printer
setting screen
printer modifi ed
Operator has opened audit trail
view screen
Audit_Trail print
“print screen search con-
ditions”
*1 Same for time period and offset, but new log-in is required.